Filter
Top Products
Appendix K Router Platform User Interface Reference
Advanced Interface Settings Page
K-30
User Guide for Cisco Security Manager 3.2
OL-16066-01
Cisco Discovery Protocol settings
Enable CDP When selected, the Cisco Discovery Protocol (CDP) is enabled on this
interface. This the default.
When deselected, CDP is disabled on this interface.
CDP is a media- and protocol-independent device-discovery protocol that
runs on all Cisco-manufactured equipment including routers, access servers,
bridges, and switches. It is primarily used to obtain protocol addresses of
neighboring devices and discover the platform of those devices.
Note ATM interfaces do not support CDP.
Log CDP Messages Applies only to Ethernet interfaces.
When selected, duplex mismatches for this interface are displayed in a log.
This is the default.
When deselected, duplex mismatches for this interface are not logged.
NetFlow settings
Enable Ingress
Accounting
When selected, NetFlow accounting is enabled on traffic arriving on this
interface.
When deselected, NetFlow accounting on arriving traffic is disabled. This is
the default.
Cisco IOS NetFlow provides the metering base for a key set of applications
including network traffic accounting, usage-based network billing, network
planning, as well as Denial Services monitoring capabilities, network
monitoring, outbound marketing, and data mining capabilities for both
service provider and enterprise customers.
Note You must use the CLI or FlexConfigs to enable Cisco Express
Forwarding (CEF) or distributed CEF (dCEF) before using this
option.
Enable Egress
Accounting
When selected, enables NetFlow accounting on traffic leaving this interface.
When deselected, disables NetFlow accounting on traffic leaving this
interface. This is the default.
Note You must use the CLI or FlexConfigs to enable Cisco Express
Forwarding (CEF) or distributed CEF (dCEF) before using this
option.
Table K-13 Advanced Interface Settings Dialog Box (Continued)