Filter
Top Products
Hard Disk Over write
NOTE: Hard Disk Over write feature is available only when the optional hard disk is installed.
NOTE: Overwrite of the hard disk may take several hours. When overwriting the hard disk, all functions of the printer are
inoperable.
Purpose:
To erase the contents of the entire hard disk by overwriting the hard disk with meaningless data.
Va lue s :
Off
*
Disables overwrite of the hard disk.
Single Pass Overwrites the hard disk once.
3 Pass Overwrites the hard disk three times.
Login Error
NOTE: Login Error feature is available only when Panel Lock Control is set to Enable.
Purpose:
To specify the number of error entry attempts allowed when you log in as an administrator in the Admin
Settings and Report/List menu.
Va lue s :
Off
*
Does not allow an administrator to log in after one error entry attempt.
On 5
*
Sets the number of error entry attempts allowed when an administrator logs in.
Available Range: 1-10
Defaults Settings
Use Defaults Settings to modify the USB Direct Print menu defaults.
USB Direct Print Defaults
Purpose:
To modify the defaults for the USB Direct Print Defaults menu. See "USB Direct Print" for more details.
Tray Settings
Use the Tray Settings menu to define the print media loaded in tray1 and the optional 550-sheet feeder.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
MPF
Purpose:
To specify the paper loaded in the MPF.
Va lue s :
Paper Size
*1
Use Driver Settings
*
mm series A4
A5
Understanding the Printer Menus
216