Filter
Top Products
Authentication System
Specify the server authentication type, the server response time-out, or the search time-out.
When Using the Dell Printer Configuration Web Tool
1
Launch
Dell Printer Configuration Web Tool
.
a
Open the web browser.
b
Enter the IP address of your printer in the web browser.
See "Dell™ Printer Configuration Web Tool.
"
2
Select
Print Server Settings
.
3
Click the
Security
tab.
4
Select
Authentication System
.
Authentication System
page is displayed.
• Select the authentication system for
Authentication System Settings
.
• Specify the time-out period for
Server Response Time-Out
.
• Specify the time-out period for
Search Time-Out
.
5
Click
Apply New settings
.
6
Turn off the printer, and turn it on again to apply the settings.
Authentication System Settings
Select the authentication system from the list. The change becomes effective after the printer is turned off and then
on again.
Server Response Time-Out
Specify the amount of time the printer should wait for response from the server. Set the time period from 1 up to 75
seconds. The change becomes effective after the printer is turned off and then on again.
Search Time-Out
Specify the amount of time the printer should wait for searching for the server. Set the time period from 5 up to 120
seconds. The change becomes effective after the printer is turned off and then on again.
Kerberos Server
Specify the settings for the Kerberos Server.
When Using the Dell Printer Configuration Web Tool
1
Launch
Dell Printer Configuration Web Tool
.
a
Open the web browser.
b
Enter the IP address of your printer in the web browser.
See "Dell™ Printer Configuration Web Tool.
"
2
Select
Print Server Settings
.
3
Click the
Security
tab.
4
Select
Kerberos Server
.
Printing Using ColorTrack (External Authentication) 275