Filter
Top Products
108
Dell™ Printer Configuration Web Tool
Reports
Purpose:
To print various types of reports and lists.
Va lues:
Printer Settings
The Printer Settings tab includes System Settings, Network Settings, USB Settings, PCL Settings, PS Settings,
PDF Settings, and Secure Settings pages.
System Settings
Purpose:
To configure the basic printer settings.
Va lues:
Printer Settings Click Start to print the Printer Settings report.
Panel Settings Click Start to print the Panel Settings report.
PCL Fonts List Click Start to print the PCL (Hewlett-Packard Printer Control Language) Fonts List.
PCL Macros List Click Start to print the PCL Macro List.
PS Fonts List Click Start to print the PS Fonts List.
PDF Fonts List Click Start to print the PDF Fonts List.
Job History Click Start to print the Job History report.
Error History Click Start to print the Error History report.
Print Meter Click Start to print the Print Meter report.
Demo Page Click Start to print Demo Page.
Stored Documents
*1
Click Start to print the Stored Documents list.
*1
This item is available only when RAM Disk is enabled.
Power Saver Time - Sleep Sets the time taken by the printer to enter Sleep mode after it finishes a job.
Power Saver Time - Deep Sleep Sets the time taken by the printer to enter Deep Sleep mode after it has
entered Sleep mode.
Power Saver Time - Power Off Timer
*1
Sets the time taken by the printer to be turned off after it has entered Deep
Sleep mode.
mm / inch Sets the measurement unit to be used on the LCD panel as either mm or
inches.
Control Panel Tone Sets the volume of the tone that is emitted when the operator panel input is
correct, or disables the tone.
Invalid Key Tone Sets the volume of the tone that is emitted when the operator panel input is
incorrect, or disables the tone.
Machine Ready Tone Sets the volume of the tone that is emitted when the printer becomes ready,
or disables the tone.
Job Completed Tone Sets the volume of the tone that is emitted when a print job is complete, or
disables the tone.
Fault Tone Sets the volume of the tone that is emitted when a job ends abnormally, or
disables the tone.