Filter
Top Products
Dell™ Printer Configuration Web Tool
115
Reset Defaults
Purpose:
To initialize the non-volatile (NV) memory. After executing this function and rebooting the printer, all the menu
parameters are reset to their default values.
Va lues:
Initialize PrintMeter
Purpose:
To initialize the print meter of the printer. When the print meter is initialized, the meter count is reset to 0.
Storage
NOTE:
Storage feature is available only when RAM Disk is enabled.
Purpose:
To clear all files stored in the RAM disk.
Va lues:
Non-Dell Toner
Purpose:
To use toner cartridge of another manufacturer.
WARNING:
Using a non-Dell toner cartridge may severely damage your printer. The warranty does not cover damages caused
by using non-Dell toner cartridges.
Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed.
The discharge phenomenon for charging the photo conductor varies with barometric pressure. Adjustments are
performed by specifying the altitude of the location where the printer is being used.
StaticMemory Ctr
Purpose:
To widen the print gap not to leave toner streak on the next page.
Reset Defaults and
restart printer.
Click Start to reset the default setting and restart the printer.
Power On Wizard Click Start to perform initial setup for the printer.
Clear Storage
*1
All Clear Click Start to clear all files stored as Secure Print, Proof Print, Private Mail Box
Print, and Public Mail Box Print in the RAM disk.
Secure Document Click Start to clear all files stored as Secure Print, Proof Print, Private Mail Box
Print, and Public Mail Box Print in the RAM disk.
Stored Document Click Start to clear all files stored in the RAM disk.
*1
This item is available only when RAM Disk is enabled.