Filter
Top Products
252
Maintaining Your Printer
Replacing the Fusing Unit, the Transfer Unit, and the Retard Roller
You need to replace all three parts (the Fusing Unit, Transfer Unit, and retard roller) at a time. Both the Transfer
Unit and the retard roller for replacement come with a new fusing Unit.
WARNING:
Before performing any of the following procedures, read and follow the safety instructions in the
Important
Information
.
Replacing the Fusing Unit
WARNING:
Before performing any of the following procedures, read and follow the safety instructions in the
Important
Information
.
Removing the Fusing Unit
1
Turn off the printer, and wait for 40 minutes.
2
Pull the rear cover handle to open the rear cover.
3
Raise the two gray levers on the both sides of the fusing unit to unlock.