Filter
Top Products
122
Dell™ Printer Configuration Web Tool
Bonjour (mDNS)
Purpose:
To configure the detailed settings of Bonjour.
Va lues:
SNMP
Purpose:
To configure the detailed settings of SNMP.
Va lues:
SNMP v1/v2c
Purpose:
To edit the detailed settings of SNMP v1/v2c protocol.
To enter this page, click Edit SNMP v1/v2c Properties in the SNMP page.
Va lues:
Host Name Sets the host name up to 63 alphanumeric characters and "-" (dash).
Printer Name Sets the printer name up to 63 alphanumeric characters and symbol sets.
Wide-Area Bonjour Select the check box to enable the Wide-Area Bonjour protocol.
SNMP Configuration Enable SNMP v1/v2c
Protocol
Select the check box to enable the SNMP v1/v2c protocol.
Edit SNMP v1/v2c
Properties
Click to display the SNMP v1/v2c page and to edit the setting of SNMP
v1/v2c protocol from the page.
Enable SNMP v3
Protocol
Select the check box to enable the SNMP v3 protocol.
Edit SNMP v3
Properties
Click to display the SNMP v3 page and to edit the setting of SNMP v3
protocol from the page.
You can click this item only when SSL communication is enabled.
Community Name Community Name
(Read only)
*1
Sets the community name to access (read only) data using up to 31
alphanumeric characters.
The default Read Community is public.
Re-enter Community
Name (Read only)
*1
Enters the community name to access (read only) data again to confirm it.
Community Name
(Read/Write)
*1
Sets the community name to access (read and write) data using up to 31
alphanumeric characters.
The default Read/Write Community is private.
Re-enter Community
Name (Read/Write)
*1
Enters the community name to access (read and write) data again to
confirm it.
Community Name
(Trap)
*1
Sets the community name used for trap up to 31 alphanumeric characters.
The default Trap Community is " " (NULL).
Re-enter Community
Name (Trap)
*1
Enters the community name used for trap again to confirm it.