Filter
Top Products
152
Understanding the Printer Menus
Power Saver Timer
CAUTION:
If the Power Off Timer feature is set and the power is turned off, stored data in RAM Disk is cleared.
Purpose:
To specify the time for transition to power saver mode.
Va lues:
When you specify 1 minute for Sleep, the printer enters power saver mode 1 minute after it finishes a job. This
uses much less energy, but requires more warm-up time for the printer. Specify 1 minute if your printer shares an
electrical circuit with room lighting and you notice lights flickering.
Select a high value if your printer is in constant use. In most circumstances, this keeps the printer ready to operate
with minimum warm-up time.
Select a value between 1 and 60 minutes for the power saver mode if you want a balance between energy
consumption and a shorter warm-up period.
The printer automatically returns to the standby mode from the power saver mode when it receives data from the
computer. You can also change the status of the printer to the standby mode by pressing the (Power Saver)
button on the operator panel.
If the Power Off Timer feature turns off the printer, the printer cannot be turned back on automatically. To turn the
printer back on, physically turn the power switch of the printer to On.
Auto Reset
Purpose:
To automatically reset the settings to the default settings and return to the standby mode after you do not specify
any settings for the specified time.
Sleep 10 minutes
*
Specifies the time taken by the printer to enter Sleep mode after it
finishes a job.
Available Range: 1–60 minutes
Deep Sleep 10 minutes
*
Specifies the time taken by the printer to enter Deep Sleep mode
after it has entered Sleep mode.
Available Range: 1–60 minutes
Power Off Timer
*1
Auto Detect
*
180 minutes
*
Detects whether the printer is connected to a network via Ethernet
or wireless. If the printer is connected to a network, Power Off
Timer is disabled. If the printer is not connected to a network
(connected via USB or Wi-Fi Direct), the printer automatically
turns off after the specified time has elapsed. Specify the time it
takes to automatically turn off the printer after it has entered Deep
Sleep mode.
Available Range:
60–1440 minutes
On 180 minutes
*
Specifies the time it takes to automatically turn off the printer after
it has entered Deep Sleep mode.
Available Range:
60–1440 minutes
Off Disables Power Off Timer.
*1
Power Off Timer feature is available only in certain regions.