Filter
Top Products
CHAPTER 4 PCI Card Hot Maintenance in Red Hat Enterprise Linux 6
4.6 Hot Replacement of PCI Express Cards
85
C122-E175-01EN
7. Maintenance mode is set (with information area of MMB Web-UI gray out) and then replacement
instruction for the particular PCIC appears. Replace it with this window displayed.
See the figure in ‘B.1 Physical Mounting Locations of Components’ to confirm the location of the PCI
Express card to be replaced.
Note
Do NOT click [Next] until replacing the PCIC.
8. After replacing the particular PCIC and powering on the particular PCIC slot, click [Next].
For how to power on the PCIC slot, see “Powering on and off PCI Express slots” in “4.6.2 PCI Express
card replacement procedure in detail”.
It is the administrator of your system who power off the PCI Express slot.