Filter
Top Products
CHAPTER 1 Network Environment Setup and Tool Installation
1.6 Management Tool Operating Conditions and Use
18
C122-E175-01EN
When you use two displays to operate LSI WebBIOS in Legacy Mode, use primary display of monitor 1.
If you set to ‘Hide mouse mode’ in secondary display of monitor 2, cursor does not run. Even if you set to
‘Hide mouse mode’, it is no problem to use primary display and operate UEFI.
(*2) Power menu is shown in only PRIMEQUEST 2800B. It is not shown in other models.
Sometimes you cannot operate any power operations because power button menu is grayed out.
In such case, reconnect the video redirection to select power menu button or perform the power
operation by [Power Control] window of MMB Web-UI.
TABLE 1.10 Tool Bar menu in [Video redirection] window
Tool bar
Description
[Resume Redirection]
Release pause of [Video redirection] window.
[Pause Redirection]
Perform pause of [Video redirection] window.
[Full Screen]
Maximize [Video redirection] window.
It is required that client and host are the same
resolution.
[Hard disk/USB]
Set virtual media.
[Floppy]
Set virtual media.
[CD/DVD]
Set virtual media.
[Cursor]
Display cursor.
[Softkeyboard]
Display software keyboard.
[Video Record]
Perform setup for record of [Video redirection] such
as record time and save location.
[Hot Keys]
Set Hot keys (shortcut key).
[Zoom]
Zoom in or Zoom out [Video redirection] window.
TABLE 1.11 Status Bar in [Video redirection] window
Status Bar
Description
[LALT]
Hold down left [Alt] key.
[LALT] button turns red.
[LCTRL]
Hold down left [Ctrl] key.
[LCTRL] button turns red.
[RALT]
Hold down right [Alt] key.
[RALT] button turns red.
[RCTRL]
Hold down right [Ctrl] key.
[RCTRL] button turns red.
[Num]
Hold down right [Num] key.
[Num] button turns red.
[Caps]
Hold down right [Caps] key.
[Caps] button turns red.
[Scroll]
Hold down right [Scroll] key.
[Scroll] button turns red.
Note
- When resolution of window in server is 800 x 600, a part of window displayed in video redirection may
luck or track of mouse cursor may remain during installing Linux.
- While the video redirection is being used, a warning message indicating that the digital signature is
expired may be displayed. Since this warning message does not affect the operation of Java Application,
click the [Execute] button. To avoid displaying this waning message every time the video redirection is
connected, check the check box for [Always trust content from this publisher], and click the [Execute]
button.
- Network communication problems between the terminal and PRIMEQUEST may cause a session
interruption, resulting in the [Video Redirection] window failing to respond to user operation. In such cases,
the window cannot be closed normally. Reconnect to the network after forcibly ending the video
redirection.
- If below problems occur while using video redirection, reconnect video redirection.
- No response comes from video redirection and any operation cannot be performed.
- Display of video redirection window remains black or ‘No Signal’.
- Error dialog of video redirection appears and any operation cannot be performed.
- Window of video redirection is disconnected unintentionally.