Filter
Top Products
CHAPTER 4 PCI Card Hot Maintenance in Red Hat Enterprise Linux 6
4.2 Hot add of SB
59
C122-E175-01EN
4.1.2 dp Command Package Install/ Uninstall
This section describes the install /uninstall of the dp command package.
The dp command can be applied using the SVIM application wizard. When installing after building the system,
procure the package from Fujitsu Web download site, and install following the procedure below.
<Common install /uninstall>
Use FJSVdp-util-RHEL<Version number>-x.x.x-x-x86_64.tar.gz.
The file name for the RHEL6 dp command package is FJSVdp-util-RHEL6-x.x.x-x-x86_64.tar.gz. the
following files are stored.
FJSVdp-util/RPMS/FJSVdp-util-RHEL6-x.x.x-x.noarch.rpm
FJSVdp-util/SRPMS/FJSVdp-util-RHEL6-x.x.x-x.noarch.rpm
FJSVdp-util/DOC/README.ja_JP.EUC.txt
FJSVdp-util/DOC/README.ja_JP.SJIS.txt
FJSVdp-util/DOC/README.ja_JP.UTF-8.txt
FJSVdp-util/DOC/README.txt
FJSVdp-util/INSTALL.sh
FJSVdp-util/UNINSTALL.sh
<When installing>
Install FJSVdp-util-RHEL6-x.x.x-x.noarch.rpm using the following procedure.
1. Become super user.
$ su -
2. Execute INSTALL.sh in the FJSVdp-util directory.
Depending on the status, the rpm package will be installed or uninstalled.
# FJSVdp-util/INSTALL.sh
3. Restart the system.
# /sbin/shutdown -r now
<During uninstallation>
Perform the uninstallation using the following procedure.
1. Becomes super user.
$ su -
2. Execute UNSTALL.s in the FJSVdp-util directory.
# FJSVdp-util/UNINSTALL.sh
3. Restart the system.
# /sbin/shutdown -r now
4.2 Hot add of SB
This section describes the hot add of SB.
4.2.1 Preparing for SB hot add
The preparation flow is described below.
1. Estimate the following capacities.
- Resources to be added (CPU/DIMM)
- Number of CPUs and DIMMs to be added
2. Arrange the SBs to be added.
3. Check if the volume of resources estimated in arranged SBs to be added, have been mounted.
4. Confirm the installation of the DR function using the following procedure.