Filter
Top Products
Appendix J How to Confirm Firmware of SAS RAID Controller Card
J.3 How to confirm firmware version and UEFI driver version of FC card
251
C122-E175-01EN
J.3.1 How to confirm firmware version for FC card made by Qlogic
Confirming UEFI driver version and firmware version
1. Select [Force boot into EFI Boot Manager] by [Boot Selection] in [Power Control] window of MMB Web-UI.
Partition is powered on and logo of FUJITSU appears.
Note
For a FC card made by Qlogic, you can confirm the firmware version only when a partition starts up.
FIGURE J.19 FUJITSU logo window
2. UEFI driver version and firmware version is shown.
FIGURE J.20 Confirmation of UEFI driver version and firmware version
Note
Window goes next automatically.
3. Boot Manager front page appears.