Filter
Top Products
Appendix A Functions Provided by the PRIMEQUEST 2000 Series
A.2.4 Hardware status display
204
C122-E175-01EN
A.2 Correspondence between Functions and Interfaces
The following shows the correspondence between the functions provided by PRIMEQUEST 2000 series and
interfaces.
A.2.1 System information display
TABLE A.8 System information display
Function
MMB
Web-UI
MMB CLI
UEFI
PSA Web-
UI
PSA CLI/
SVS CLI
System status display
(Error, Warning)
Supported
System event log (SEL)
display
Supported
System event log (SEL)
download
Supported
MMB Web-UI/CLI operating
log display
Supported
System information display
(P/N, S/ N)
Supported
Firmware version display
Supported
Supported
A.2.2 System settings
TABLE A.9 System settings
Function
MMB
Web-UI
MMB CLI
UEFI
Primary and secondary power feed
Supported
Supported
Power-on setting at power recovery
Supported
Supported
Start delay time at power recovery
Supported
Supported
Installation altitude
Supported
Supported
PSU redundancy setting
Supported
Supported
It sets it to Reserved SB at the maximum
waiting time until Force Power Off of
Partition including correspondence SB at
the switch is begun
Supported
Effective and invalid setting of Power
Saving function as the entire System
Supported
Power consumption threshold (Limit value)
setting of the entire System
Supported
A.2.3 System operation
TABLE A.10 System operation
Function
MMB
Web-UI
MMB CLI
UEFI
System power control (On/Off/Force P-off)
Supported
Supported
A.2.4 Hardware status display
TABLE A.11 Hardware status display
Function
MMB
Web-UI
MMB CLI
UEFI
LED status display
Supported
LED operation (on, clear, blinking)
Supported