Filter
Top Products
CHAPTER 10 Error Notification and Maintenance (Contents, Methods, and Procedures)
10.4 Collecting Maintenance Data
189
C122-E175-01EN
Item
Description
The default is [All].
Sort by Date/Time
Select ascending or descending order for displaying events by using the radio
buttons.
The default is [New event first].
Start Date/Time
Select the first event or an event of the specified time by using the radio
buttons.
If you select [Specified Time], you can enter the start time.
Even after a switch to [First Event] and back to [Specified Time], the window
retains the time data entered in [Specified Time].
The default is [First event].
The default for [Specified Time] is 2013/01/01 00:00:00.
End Date/Time
Select the last event or an event of the specified time by using the radio
buttons.
If you select [Specified Time], you can enter the last time.
Even after a switch to [Last Event] and back to [Specified Time], the window
retains the time data entered in [Specified Time].
The default is [Last event].
The default for [Specified Time] is 2013/01/01 00:00:00.
Number of events to
display
Specify the number of events to display.
The denominator represents the total number of events logged.
The specifiable maximum value is 3000. The default is 100.
*1: The item of Partition is displayed in PRIMEQUEST 2400E and 2800E. It is not displayed in PRIMEQUEST
2800B.
Displaying details of an event
Procedure
1. Click the [Detail] button of the event to display its details.
The [System Event Log (Detail)] window appears.
FIGURE 10.15 [System Event Log (Detail)] window
2. Click the button of the chosen operation.
[Back] button: The display returns to the [System Event Log] window.
[Previous] button: The window displays the previous event according to the display order in the [System
Event Log] window. Note that the order of events displayed in the [System Event Log] window is not the
actual order of stored events in the SEL.