Filter
Top Products
CHAPTER 6 PCI Express card Hot Maintenance in Windows
6.5 Hot Replacement Procedure for iSCSI
151
C122-E175-01EN
6. Replace NIC by using MMB Maintenance Wizard. [FE’s work]
Replace NIC with step 4 at 6.2.1 Replacement procedure in 6.2 Common Hot Plugging Procedure for PCI
Express cards.
Note
In case of using SVagent, “Source:SVagent, ID: 25004 Error massage” is logged in SEL when replacing,
it is no problem.
7. Set an IP address for the replacement device.
Set the IP address and subnet mask recorded in step 2.
Remarks
If the following message appears when you set the IP address, select [Yes].
8. Click the [Refresh] button on the [Targets] tab in the [iSCSI Initiator Properties] window. Confirm that the
target status becomes [Connected].
Windows Server 2008 R2