Filter
Top Products
Chapter 5 Configuration Menu
> 5.1 Resource Domain Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
111
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
5.1.3.1 Assigning RAID Group
This section explains Assigning RAID Group settings.
Procedure
1 Click [Assign Resources] under the Resource Domain Management in the
[Configuration] menu.
→ The [Assign Resources (Select Resource)] screen appears.
2 Click the [RAID Group] link.
(This screen is displayed when logged on the ETERNUS DX400/DX8000 series in which
the Resource Domains are registered using a Total Administrator account.)
→ The [Assign Resources (Set RAID Group)] screen appears.
Refer to "A.9.1 Assign Resources (Set RAID Group) Screen" (page 705) for screen
details.
If logged on using a user account that does not support any of the
"RAID Group Settings - Change", "Host Settings - Open", and "Eco-
mode", the [Suppress Function] screen appears. Click the [OK]
button to return to the [Menu] screen.
• If logged on using a user account that does not support the "RAID
Group Settings - Change", the [RAID Group] link is not displayed.
• When obtaining RAID Group information, a message to that effect
is displayed. Wait until the process is complete.
• If there are no RAID Groups registered in the ETERNUS DX400/
DX8000 series that can be assigned to domains, the [Suppress
Function] screen appears. Click the [OK] button to return to the
[Assign Resources (Select Resource)] screen.