Filter
Top Products
Chapter 5 Configuration Menu
> 5.2 RAID Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
202
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
3 Select the volumes or a range of volume to be changed and click the [Set]
button.
The three methods below show how to specify the volume to be changed.
A concatenated volume is changed by the concatenated volume units.
• Individual (multiple selections can be made)
Select the volume to be encrypted from the Logical Volume list.
• Range (Mainframe)
Enter the first and last volume numbers to be changed in the From/To fields.
Volumes with checkboxes in the specified range can be changed.
Mainframe Volumes, MVV Volumes, and MVV Concatenated Volumes can be
changed.
• Range (Open)
Enter the first and last volume numbers to be changed in the From/To fields.
Volumes with checkboxes in the specified range can be changed.
Open Volumes, Snap Data Volumes, Open Concatenated Volumes, MVV Volumes,
and MVV Concatenated Volumes can be changed.
→ The [Convert Encryption Volume (Check Execution)] screen appears.
• When any of the following operations are being executed,
encryption cannot be used. (Checkbox is not displayed). Perform
the encryption after the executing operation has been completed.
- Format
- RAID Migration
- Logical Volume in the RAID Group where LDE is being
executed
• Snap Data Pool Volumes cannot be encrypted. For a Snap Data
Pool Volume, a checkbox is not displayed.
• Thin Provisioning Volumes cannot be encrypted. For a Thin
Provisioning Volume, a checkbox is not displayed.
• Temporary Volumes cannot be encrypted. For a Temporary
Volume, a checkbox is not displayed.