Filter
Top Products
Appendix C Syslog Message List
> C.1 Syslog Function
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
824
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
4 MSG TAG Program
process
Name of the program or process that generates the
message is output.
"Storage" is output for all the messages, and a colon
[:] and a blank, which indicate the end of the TAG
field, follow.
5 CONTENT Message
type
One of the following message types is output
according to the message:
"Event", "Operation"
6 Format
version
Format version of the message is output.
The format version is "1.0" regardless of the mes-
sage type.
7CM No. and
message ID
CM number of the Controller Module that outputs
the message and the message ID are output. The
CM number and the message ID are separated by a
blank.
Value between 0 and 7 is output according to the
message for the CM No..
Message ID is a sequential serial number between
0 and 65535 for each Controller Module. The value
is reset to "0" when the Controller Module is acti-
vated or when the value exceeds 65535.
8 Device name
and
Device
number
The device name and the device number that are
separated by a blank are output.
9 Event type
code
The Message event type and the event code that
are separated by a blank are output.
One of the following letters is output as an event
type:
"P", "J", "M", "I"
Event code is a 8-digit hexadecimal number accord-
ing to the message.
Refer to "C.2 Syslog Message List" (page 825)
for
details.
10 Reserved Not used in this version, and not output.
11 Reserved Not used in this version, and not output.
12 Reserved Not used in this version, and not output.
13 Message Message that indicates the event is output in text
format.
Refer to "C.2 Syslog Message List" (page 825)
for
details.
No. Part name Field name Item Description