Filter
Top Products
Chapter 5 Configuration Menu
> 5.4 Host Interface Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
323
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
4 Click the [OK] button.
→ The [Set CA Parameters (Updating Configuration Information)] screen appears.
When the process is successfully completed, the [Set CA Parameters (Copy Result)]
screen appears.
• When the connection topology of the copy source CA Port is "FC-
AL Connection Loop-ID (Manual)", the setting value of "Loop-ID"
will not be copied. After the connection information has been
copied, set the "Loop-ID" of the copy destination CA Port.
• When the copy source is "iSCSI-CA" Port, the "IP Address",
"iSCSI Name", and "Alias Name" will not be copied. After the
connection information has been copied, set the "IP Address",
"iSCSI Name", and "Alias Name (if necessary)" of the copy
destination CA Port.
• When the copy source is "iSCSI-RA" Port, the "IP Address",
"iSCSI Name", and "Alias Name" will not be copied. After the
connection information has been copied, set the "IP Address" and
"Alias Name (if necessary)" of the copy destination CA Port.
• When the copy source is the "FC-CA" Port and the Affinity Mode
is [OFF], the copy destination CA Port where registration
information of LUN mapping will be changed is displayed with a
yellow background. LUN mappings for the CA Ports with a yellow
background (0x100 – 0x1FF) is deleted after copying the FC-CA
Port.
• When the copy source is the "iSCSI-CA" Port and the Affinity
Mode is [OFF], the copy destination CA Port where the
registration information of LUN mapping will be changed is
displayed with a yellow background. LUN mappings for the CA
Ports with a yellow background (0x100 – 0x1FF) is deleted after
copying the iSCSI-CA Port.
• If the OS Kind of the OCLINK is changed by copying, the
mapping information will be deleted.