Filter
Top Products
184 MFP disassembly/assembly ENWW
Installing wires
2. Install the pulley, pass
wire D through the pulley,
and install the wire
restraining cover and
E-ring.
Wire restraining cover
Pulley
E-ring
Wire C
(black)
Wire D
(white)
5. Install the wires C and D from
inside the drive shaft hole, push in
the drive pulley, and secure with
E-rings.
4. Install the pulley, pass
wires C and D, and install
the wire restraining cover
and retaining ring. Wire D
must be inside. Wires must
not cross.
Wire C (black)
Wire D (white)
E-ring
E-ring
7. Install the wires A and B from
inside the drive shaft hole, push
in the drive pulley, and secure
with E-rings. Next, install the drive
pulley holder.
Wire A
(black)
Wire B
(white)
Drive pulley
Drive pulley
E-ring
E-ring
E-ring
Wire A
(black)
Wire B (white)
Up/down plate
1. Pass wire D
through the
up/down plate.
3. Pass wire C through
the up/down plate.
Wire C (black)
Wire D (white)
6. Repeat steps 1 to 4 to install
wire A and wire B.