Filter
Top Products
ENWW Conveyance section 25
Finisher unit explanation
The gate cam consists of two cams (/U
and /L) on the same shaft. The position
of the cams determines the paper path.
*2 Bypass gate
The bypass gate is located on the path
to the stacker. This gate changes the
conveyance path of the next sheet while
the stapling is being performed, saving
time and improving performance. This
gate is used for small size papers (A4,
B5, and 8.5 by 11). The gate changes
the feeding direction of the second
sheet so that it is laid over the first
sheet. The first and second sheets will
be conveyed to the stacker
simultaneously.
The bypass gate SD (SD705) drives the
bypass gate.
Gate HP PS (PS716)
Gate drive motor (M712)
Gate cam
Gate/L
Gate/U
Sub-tray paper exit
Gate HP PS (PS716)
To sub-tray
Gate/U
Gate/L
Cam/L
Cam/U
Stacker section
paper exit
To stacker section
Main tray paper exit
To main tray