Filter
Top Products
ENWW Stacker section 43
Finisher unit explanation
M716 (alignment/L) control (Q3634A only)
In the folding, stitch-and-fold, tri-folding
modes, the widthwise alignment operation of
the paper carried into the stacker section is
performed by the alignment plate/L. The
space between the two alignment plates/L
extends or shrinks by means of the rotation
of M716 (alignment/L).
The finisher CB (finisher control board)
controls the operation of M716 through the
RB (relay board).
The related signals are PS705 (stacker
entrance) and PS724 (alignment HP/L).
1 Operation
The finisher operation signal from the
MFP lets M716 (alignment/L) rotate so
that the space between the two alignment
plates/L will become narrower. The
rotation of M716 stops when the plates
reach their waiting positions that provide a
little wider space for the paper to be
accommodated.
When PS705 (stacker entrance) has
detected the rear end of the paper and a
predefined time period has elapsed, the
alignment plates/L horizontally oscillate to
align the paper. The oscillation is provided
by the normal and reverse rotations of
M716. This paper alignment action is
repeated each time a sheet of paper is
fed.
2 Signals
a Finisher CB input signals
1 PS724 IN (PS724 to RB to finisher
CB)
Signal relating to the detection of the
home position of the alignment
plate/L
[L]: Not in the home position
[H]: In the home position
b Finisher CB output signals
1 M716 DRV A, A
(finisher CB to RB to
M716)
Pulse signal to drive/control the
Phase A of M716
2 M716 DRV B, B
(finisher CB to RB to
M716)
Pulse signal to drive/control the
Phase B of M716
5V
PS724 IN
GND
5V
PS705 IN
GND
PS724
PS705
FNS CB
MAIN BODY
24V
24V
M716 DRV A
M716 DRV A
M716 DRV B
M716 DRV B
M716
M718 DRV A
M718 DRV A
M718 DRV B
M718 DRV B
RB