Filter
Top Products
ENWW Paper feed unit 13
Post insertion unit
explanation
6 PS206 IN (PS206 to PIDB)
Detection signal of sheet passage on
lower tray
L: Sheet passed
H: Sheet not passed
7 PS207 IN (PS207 to PIDB)
Detection signal of no sheet on lower
tray
L: Sheet detected
H: Sheet not detected
8 PS208 IN (PS208 to PIDB)
Detection signal of sheet setting on
lower tray
L: Sheet detected
H: Sheet not detected
9 PS209 IN (PS209 to PIDB)
Detection signal of upper limit of
up/down plate/L
L: Positioned at upper limit
H: Not positioned at upper limit
10PS210 IN (PS210 to PIDB)
Detection signal of lower limit of
up/down plate/L
L: Positioned at lower limit
H: Not positioned at lower limit
11PS212 IN (PS212 to PIDB)
Detection signal of sheet size on
lower tray
L: Sheet detected
H: Sheet not detected
12VR201 IN (VR201 to PIDB)
Detection signal of sheet size on
lower tray
13VR202
Detection signal of sheet size on
lower tray
14M203 LD (M203 to PIDB)
Achieves specified speed of M203
L: Achieves specified speed
H: Not achieves specified speed
15MPI_DRV_SEL IN (finisher CB to
PIDB)
Switch signal between M201/M202,
MC201/MC202, and SD201/SD202
16MPI_M_CONT (finisher CB to PIDB)
Drive control signal of M201/M202
L: ON
H: OFF
17MPI_M_F/R (finisher CB to PIDB)
Rotating direction signal of
M201/M202
L: Tray down
H: Tray up
18MPI_SD_CONT (finisher CB to PIDB)
Drive control signal of SD201/SD202
L: ON
H: OFF
19MPI_MC_CONT (finisher CB to
PIDB)
Drive control signal of M201/M202
L: ON
H: OFF
20MC203 P/S (finisher CB to PIDB)
Drive control signal of M203
L: ON
H: OFF
21M203 CLK (finisher CB to PIDB)
Clock signal for controlling the
rotating speed of M203
22M203 F/R (finisher CB to PIDB)
Rotating direction signal of M203
L: CW
H: CCW