Filter
Top Products
ENWW Punch section 15
Punch kit unit explanation
2 Signals
a Input signals
1 PS801 IN (PS801 to PKDB)
Punch drive HP detection signal
[L]: Other than HP
[H]: HP
2 PS803 IN (PS803 to PKDB)
Punch unit HP detection signal
[L]: Other than HP
[H]: HP
3 IN1 to 5 (PAPER EDGE SENSOR to
PKDB)
• IN1 to 5 (paper edge sensors)
[L]: Without paper
[H]: With paper
4 M801 CONT (finisher CB to PKDB)
on/off control signal for M801 (punch)
[L]: M801 ON
[H]: M801 OFFoffoff
5 M801 F/R (finisher CB to PKDB)
Signal for switching the direction of
rotation for M801 (punch)
[L]: Forward direction
[H]: Reverse direction
6 SIG_1 to 10 (finisher CB to PKDB)
PK control signal from finisher CB
b Output signals
1 M801: DRV 1, 2 (PKDB to M801)
Drive signal for M801 (punch)
2 M802: DRVA, A, B, B (PKDB to
M802)
Drive signal for M802 (punch shift)
(A phase, B phase)
3 PKSET, PKSET2 (PKDB to finisher
CB)
Connection signal of PK
[L]: Connected
[H]: Not connected
4 OUT-1 to 10 (PKDB to finisher CB)
Status informing signal from PK to
finisher CB