Filter
Top Products
ENWW Stacker section 75
Finisher
disassembly/assembly
6 Remove the E-ring to remove the shaft,
then fold up the arm and secure it using
tape or other materials.
7 Remove two screws, and further pull
stacker unit out.
CAUTION Place something under the
drawn stacker unit to
prevent the finisher from
falling due to the weight of
the unit.
8 Remove two screws. Lift the stacker unit
to detach from the guide rail.
WARNING! Take care of your posture
when servicing to avoid
damage to your back or
other joints.
9 Reinstall the above parts following the
removal steps in reverse.
CAUTION Make sure that the hook in
the guide rail is inserted
into the mounting hole of
the stacker unit, and then
tighten the securing screw.
Arm
E-ring
Shaft
Stacker unit
Screw
Support preventing the falling of the FNS
Unit
Guide
rail
Stacker unit
Screw
Screw
Mounting
hole
Unit
Guide rail