Filter
Top Products
Installing the 201i server in the Succession CSE 1000 system Standard 1.0
100 CallPilot
Removing the Media Gateway or Media
Gateway Expansion cover
Introduction
To access the interior of the Media Gateway or Media Gateway Expansion,
you must remove the front bezel and inside front cover plate.
To remove the front bezel and inside front cover plate
1 Remove the front bezel from the Media Gateway or Media Gateway
Expansion as shown in the diagram on the next page.
.
WARNING
Risk of eye injury
Nortel Networks recommends that you operate the Media
Gateway and Media Gateway Expansion with their front bezels
installed. When the blue LEDs inside these units are lit, they
are very bright. Avoid staring at them.