Filter
Top Products
Preparing for installation Standard 1.0
38 CallPilot
Switch and network requirements
Introduction
The information in this section will help you plan your 201i server
installation.
Meridian 1 or Succession CSE 1000 slot requirements
The 201i server occupies physical and electrical slots. You must install the
201i server in two peripheral equipment slots as follows:
Switch Slots
Meridian 1 tiered
systems
0 through 14
Ensure that both slots have electrical backplane
connectivity.
Option 11C 1 through 9 in any Option 11C cabinet
Option 11C Mini A pair of consecutive slots in any cabinet
Note: You cannot install the 201i server in slots 0 or
4 because these slots are dedicated to other cards. For
more information about cards and slots, refer to the
Option 11C Mini documentation.
Succession
CSE 1000
A pair of consecutive slots in any Media Gateway or
Media Gateway Expansion.
Note: The 201i server cannot be installed in slots 0
or 4 because these slots are dedicated to other cards.
For more information about cards and slots, refer to
the Succession Communication Server for
Enterprise 1000 Planning and Installation Guide
(NTP 553-3023-210).