Filter
Top Products
Installing the 201i server in a large Meridian 1 system Standard 1.0
52 CallPilot
To remove the backplane cables
1 Remove the I/O panel cover from the rear of the Meridian 1 switch.
2 Remove the protective plate from the rear of the Meridian 1 switch.
3 Remove the existing backplane cable, including the I/O filter assembly
(NT8D81xx) and mounting hardware for the left slot as follows:
a. Remove the external cable attached to the outside of the I/O panel.
b. For each of the UP 1, UP 2, and UP 3 cable connectors, push the lock
tab outwards to unlock the cable connection, and then pull the
connector off.
G101547