Filter
Top Products
Connecting peripheral devices to the 201i server Standard 1.0
148 CallPilot
To connect the CD-ROM and tape drives to the 201i server
(Option 11C Mini)
1 Connect the first SCSI device as follows:
2 Connect the low-profile right-angle SCSI cable connector to the SCSI
connector on the 201i server’s faceplate.
3 Connect an additional device in a daisy chain, if required, using either the
SCSI cable supplied with the device or an NTRH3502 cable.
The following diagram shows cable connections, where the CD-ROM
drive is the first device:
IF the first
device is the THEN
CD-ROM drive do the following:
a. Attach the A0769312 SCSI adapter to the CD-ROM
drive.
b. Connect the NTRH3502 SCSI cable that you
installed earlier on the Option 11C Mini to the SCSI
adapter on the CD-ROM drive.
tape drive connect the NTRH3502 SCSI cable that you installed
earlier on the Option 11C Mini to the tape drive.