Filter
Top Products
Connecting peripheral devices to the 201i server Standard 1.0
146 CallPilot
To connect the CD-ROM and tape drives to the 201i server
(Option 11C)
1 Connect the first SCSI device as follows:
2 Connect the low-profile right-angle SCSI cable connector to the SCSI
connector on the 201i server’s faceplate.
3 Connect an additional device in a daisy chain, if required, using either the
SCSI cable supplied with the device or an NTRH3502 cable.
IF the first
device is the THEN
CD-ROM drive connect the NTRH3502 SCSI cable from the
CD-ROM drive to the SCSI connector that is
located on the intermediate SCSI cable bracket
assembly (NTRH1407) on the Option 11C.
tape drive do the following:
a. Attach the A0769312 SCSI adapter to the tape
drive.
b. Connect the NTRH3502 SCSI cable from the
adapter to the SCSI connector that is located on
the intermediate SCSI cable bracket assembly
(NTRH1407) on the Option 11C.