Filter
Top Products
May 2003 Preparing for installation
Part 2: 201i Server Hardware Installation 35
Unpacking and inspecting the 201i server
Introduction
This section describes how to
unpack the 201i server and peripherals
inspect the 201i server for damage
It also describes what to do if you determine that the 201i server is faulty.
To unpack the 201i server
1 Remove the 201i server from the carton and its antistatic bag.
2 Place the 201i server on an antistatic surface.
3 Carefully open the cartons containing the monitor, keyboard, mouse,
modem, and ELAN hub (if supplied), and set the peripherals aside.
4 Put all manuals and CD-ROMs in a safe place.
5 Save all packing materials and cartons in case you must return any
equipment to the carrier.
6 Review “201i server description” on page 10, and perform a visual
inspection as described in “To inspect the 201i server for shipping
damage” on page 36.
ATTENTION
As you unpack each item, check it off against the
packing list, as well as the following checklists provided
in Part 1 of the CallPilot Installation and Configuration
binder:
“CallPilot software media and documentation checklist”
“CallPilot server hardware checklist”