Filter
Top Products
May 2003 Installing the 201i server in an Option 11C or Option 11C Mini
Part 2: 201i Server Hardware Installation 65
See the following diagram:
2 Ensure that no cables are connected to the slots in which you are
installing the 201i server.
3 Open the lock latches at the top and bottom of the 201i server faceplate.
Note: When you open the top lock latch, it breaks the yellow backplane
warning label, if the label has not been removed. The label is not relevant
for Option 11C or Option 11C Mini. Remove the label and continue with
this procedure.
G101559
A
C
B