Filter
Top Products
May 2003 Connecting peripheral devices to the 201i server
Part 2: 201i Server Hardware Installation 159
Result: The Windows NT boot sequence begins, and communication
with the switch occurs. The HEX display shows NT (for about 30
seconds), followed by OK.
Note: Before OK appears, one of the following messages may appear,
but not for more than one second: CDLN, C:01, or C:02. This is normal
operation.
If OK does not appear, refer to Part 5 of the CallPilot Installation and
Configuration binder for troubleshooting instructions.
7 Ensure that the Windows NT logon window appears on the monitor.
If the Windows NT logon window does not appear, refer to Part 5 of the
CallPilot Installation and Configuration binder for troubleshooting
instructions.
What’s next?
Continue with Part 3 of the CallPilot Installation and Configuration binder.