Filter
Top Products
Preparing for installation Standard 1.0
32 CallPilot
2 Familiarize yourself with the “Switch and network
requirements” on page 38 of this guide.
❒
3 If you are installing the 201i server into a Meridian 1 tiered
system, do the following:
Change the location of the secondary backplane
(DS30X) connector on the 201i server (see page 44).
Replace the existing backplane (tip and ring) cable on the
Meridian 1 with the one supplied with the 201i server
(NTRH3501) (see pages 51–57).
❒
4 Install the intermediate SCSI cable. This cable connects the
external CD-ROM or tape drive.
For Meridian 1, you require two cables to complete the
connection between the 201i server and the SCSI device:
NTRH1408 and NTRH1410. See page 58.
For Option 11C, you require two cables to complete the
connection between the 201i server and the SCSI device:
NTRH1407 and NTRH3502. See page 70.
For Option 11C Mini or Succession CSE 1000, you
require one cable to complete the connection between the
201i server and the SCSI device: the NTRH3502 cable
that is provided in the CD-ROM and tape drive kits. See
the following:
— Option 11C Mini: page 78
— Succession CSE 1000: page 106
❒
5 Set the DIP switches on the modem (see page 122). ❒
Step Description Check