Filter
Top Products
Installing the 201i server in a large Meridian 1 system Standard 1.0
58 CallPilot
Installing the SCSI cables for Meridian 1
Introduction
Before you can connect a CD-ROM or tape drive to the 201i server, you
must install the SCSI cables. The SCSI cables route the SCSI connection
away from the 201i server faceplate so that an external SCSI device can
remain permanently connected.
Cables you need
You require the following cables:
NTRH1408 (for connecting the 201i server to the Meridian 1 I/O panel)
The connector on the intermediate SCSI cable that attaches to the 201i
server faceplate is a low-profile right-angle connector. This allows the
cable to be attached with the Meridian 1 cabinet cover on.
G101548
Intermediate SCSI cable NTRH1408
201i server
faceplate
connector
I/O panel
connector