Filter
Top Products
May 2003 Installing the 201i server in a large Meridian 1 system
Part 2: 201i Server Hardware Installation 59
NTRH1410 (for connecting an external SCSI device to the NTRH1408
connector on the Meridian 1 I/O panel)
The total length of the cable from the I/O panel is 4.1 m (13.3 ft).
What the completed installation looks like
The following diagram shows how the intermediate SCSI cable, CD-ROM
drive, and tape drive are connected to the Meridian 1.
In this diagram, the CD-ROM drive is the first device. The tape drive is the
last device.
Note: Alternate SCSI device connection scenarios are supported, but are not
depicted in this guide. If you want to use a connection scenario that is not
described in this guide, ensure that you use appropriate cabling for each
device.
Meridian 1
201i cabling Peripheral cabling
201i
NTRH30AA
Optional
NTRH9038
Tape drive
NTRH9037
CD-ROM
drive
G101430
SCSI device cable
NTRH3502
Rear
I/O panel
NTRH1408
NTRH1410