Filter
Top Products
May 2003 Installing the 201i server in a large Meridian 1 system
Part 2: 201i Server Hardware Installation 61
3 Thread the cable through the access channel to the back of the
Meridian 1.
4 Attach the NTRH1408 cable to the inside of the I/O panel slot associated
with the 201i server’s right slot.
5 Connect the NTRH1410 cable to the NTRH1408 cable connector on the
I/O panel.
See the following diagram:
Note: The backplane connectors for the right slot are not required and,
therefore, are left vacant.
6 Thread the NTRH1410 cable through the shelves below and out through
the bottom of the Meridian 1 tower.
G101551
SCSI cable
NTRH1410
Remove
this
cover
Cable
routed
from
front
Intermediate
SCSI cable
NTRH1408