Filter
Top Products
Connecting peripheral devices to the 201i server Standard 1.0
142 CallPilot
Connecting the CD-ROM and tape drives
Introduction
You can connect the CD-ROM, tape drive, or both to the intermediate SCSI
cable that you installed earlier.
Before you begin
Before you can connect the CD-ROM or tape drive, ensure that you have
completed the following tasks:
1. Install the intermediate SCSI cable.
2. Set the SCSI ID and device termination settings as described in
“Setting the CD-ROM drive’s SCSI ID and DIP switches” on page
124
“Setting SCSI device termination” on page 128
For See
Meridian 1 “Installing the SCSI cables for Meridian 1”
on page 58.
Option 11C “Installing the intermediate SCSI cable for
Option 11C” on page 70.
Option 11C Mini “Installing the NTRH3502 SCSI cable for
Option 11C Mini” on page 78.
Succession CSE 1000 “Installing the NTRH3502 SCSI cable for
Succession CSE 1000” on page 106.