Filter
Top Products
Connecting peripheral devices to the 201i server Standard 1.0
138 CallPilot
Installing the MPCs
Introduction
Two MPCs are preinstalled at the factory. This section describes how to
install additional cards, if required.
Correct card insertion
The MPC-8 card is keyed so that it fits only one way into the slot on the 201i
server faceplate. If the card is inserted incorrectly, the card does not go all
the way into the slot.
To install the MPCs
1 Do one of the following:
2 Ensure that the MPC-8 card label is facing one of the following ways:
facing up if the 201i server is lying horizontally on a flat surface, with
the top lock latch on the left
.
CAUTION
Risk of equipment damage
If you force the card into the slot incorrectly, you can damage
the MPC-8 card and 201i server.
IF THEN
MPCs are already
installed
ensure that they are firmly seated in
their slots.
you want to install
additional MPCs
continue with the rest of this procedure.