Filter
Top Products
Installing the 201i server in an Option 11C or Option 11C Mini Standard 1.0
78 CallPilot
Installing the NTRH3502 SCSI cable for
Option 11C Mini
Introduction
Before you can connect a CD-ROM or tape drive to the 201i server, you
must install the NTRH3502 SCSI cable. The NTRH3502 SCSI cable routes
the SCSI connection away from the 201i server faceplate so that an external
SCSI device can remain permanently connected.
If the Option 11C Mini is equipped with a Fiber Routing Guide (consisting
of a spool and mounting bracket), you must remove it before you can install
the NTRH3502 SCSI cable, and then reinstall it when you are finished.
For detailed instructions on removing and installing the Fiber Routing
Guide, refer to the Option 11C and Option 11C Mini Expansion Guide
(NTP 553-3021-208).
What the completed installation looks like
The following diagram shows how the intermediate SCSI cable, CD-ROM
drive, and tape drive are connected to the Option 11C Mini. In the diagram,
the CD-ROM drive is the first device. The tape drive is the last device.