Filter
Top Products
Connecting peripheral devices to the 201i server Standard 1.0
144 CallPilot
To connect the CD-ROM and tape drives to the 201i server
(Meridian 1)
Note: If you are connecting the SCSI devices to the Option 11C, go to page
146. If you are connecting the SCSI devices to the Option 11C Mini, go to
page 148.
1 Connect the first SCSI device as follows:
2 Connect the low-profile right-angle SCSI cable connector to the SCSI
connector on the 201i server’s faceplate.
3 Connect an additional device in a daisy chain, if required, using either the
SCSI cable supplied with the device or an NTRH3502 cable.
IF the first device is the THEN
CD-ROM drive connect the CD-ROM drive to the
NTRH1410 cable that you connected earlier
to the Meridian 1 I/O panel.
tape drive do the following:
a. Attach the A0769312 SCSI adapter to the
tape drive.
b. Connect the SCSI adapter to the
NTRH1410 cable that you connected
earlier to the Meridian 1 I/O panel.