Filter
Top Products
Preparing peripheral devices Standard 1.0
132 CallPilot
What’s next?
Complete the 201i server installation in the switch. See Chapter 7,
“Connecting peripheral devices to the 201i server.”
a tape drive only do nothing.
External termination is not required
because the drive is already internally
terminated. This is indicated by a label on
the back or front of the tape drive.
both a CD-ROM drive and a
tape drive (the tape drive is
the last device)
set DIP switch 2 on the back of the
CD-ROM drive to OFF.
The tape drive is internally terminated.
External termination is not required.
IF you are connecting THEN