Filter
Top Products
May 2003 Installing the 201i server in the Succession CSE 1000 system
Part 2: 201i Server Hardware Installation 109
5 Attach and then position two ferrites from the NTRH3503 EMC kit to the
SCSI cable as follows:
a. Position the ferrites as close to the SCSI connector as possible.
b. Secure the ferrites with a tie wrap.
c. Route the SCSI cable across the inside of the Media Gateway or
Media Gateway Expansion and out through one of the cable
openings.
See the following diagram:
G101589
Drain
wire
Ferrites from
EMC kit NTRH3503
SCSI cable
NTRH3502