Filter
Top Products
Configuring KIRK Wireless Server 600v3 105
KIRK Wireless Server 600v3 Installation and Configuration Guide
7.6.2.2 Configuring LDAP Replicator (Sync Master)
In a KIRK Wireless Server 600v3 Multi-cell solution the Sync Master needs access to the
information (such as system ARI code and user data) that are stored on the Master KIRK Wireless
Server 600v3/LDAP Server. Therefore, it is necessary to activate the LDAP replicator services for
the Sync Master.
1 Under the Configuration menu, click LDAP, and then click Replicator.
Figure 57 Adm. Page: Configuration/LDAP/Replicator page
2 In the Server field, type the IP address of the LDAP Server
3 In the User field, type the user name.
4 In the Password field, type the password.
Note: User name and password must be the same as for the Master (Primary) KIRK Wireless
Server 600v3.
5 Select the Enable check box.
6 Click OK.
7 Click Reset (under Administration menu) to save your configuration.