Filter
Top Products
46 Installing the KIRK Wireless Server 600v3
14117800, Ed.2
4.3.1 KIRK Wireless Server 600v3 Indoor Wall Mounting
For best RF coverage, the KIRK Wireless Server 600v3 must be mounted vertically on walls.
Caution: The KIRK Wireless Server 600v3 must not be installed at any angle other than vertical.
If the KIRK Wireless Server 600v3 is placed upside-down, the coverage area of the KIRK
Wireless Server 600v3 is decreased by 40 - 50% and it might not transmit or receive effectively.
Caution: Do not mount the KIRK Wireless Server 600v3 on soft surfaced walls such as those
covered with canvas or sponge-like materials.
To install the KIRK Wireless Server 600v3 indoors:
1 Mount the KIRK Wireless Server 600v3 on the wall, using the anchors and screws provided.
Note: When you place the KIRK Wireless Server 600v3 on the screws, ensure that the screws
do not touch the printed circuit board.
Figure 12 KIRK Wireless Server 600v3 Wall Mounting
2 Connect the wire into the RJ45 plug on the Wireless Server 600v3.
4.4 Recording the Installation Information
After completing the installation of a KIRK Wireless Server 600v3 Multi-cell Solution, record the
location of each KIRK Wireless Server 600v3.