Filter
Top Products
Preparing KIRK Handset for Use 69
KIRK Wireless Server 600v3 Installation and Configuration Guide
• Place the KIRK Handset in the charger.
For correct charging, be sure the room temperature is between 0°C and 25°C. Do not place the
handset in direct sunlight. The battery has a built-in heat sensor which will stop charging if the
battery temperature is too high.
If the handset is turned off when placed in charger, only the LED indicates the charging. When
handset is turned off, the LED flashes at a low frequency while charging and lights constantly
when the charging is finished. There will be no reaction for incoming calls.
If the handset is turned on when charging, the display shows the charging status. The display
goes back to normal mode when fully charged. It will not vibrate. B-answer is inactive. The
handset reacts normally for incoming calls.
It is necessary to recharge the battery when the display shows BATTERY LOW, or if the handset
cannot be turned on. When the battery is fully discharged, up to 10 minutes may pass before
charging begins (display lights up). When the charger begins the charging, status is shown on the
display if the handset is turned on.
6.4.3 Charger LED Indicators
The KIRK Handset displays a progress indicator bar that shows how fully charged the battery is.
The handset LED gives the following indication:
• LED continuously on - handset is fully charged
• LED flashing - handset is charging