Filter
Top Products
Configuring KIRK Wireless Server 600v3 99
KIRK Wireless Server 600v3 Installation and Configuration Guide
7 If H323 Protocol and SKINNY Protocol: Deselect the Local R-Key/Display Handling check
box.
Note: When using SIP Protocol, the Local R-Key/Display Handling check box has to be
enabled to support supplementary services such as On hold and Call transfer.
8 If SIP Protocol: Select the DTMF through RTP channel check box.
The DTMF through RTP channel check box has to be enabled if DTMF tones are needed.
Note: The DTMF through RTP channel check box is not to be selected, when using H323
Protocol or SKINNY Protocol.
9 From the Coder list, select a voice compression value that matches your telephony
infrastructure.
Contact your system administrator for more information.
10 In the Frame field, type the desired frame length in milliseconds and then select either
Exclusive or SC (Silence Compression).
Contact your system administrator for more information.
Note: If the Exclusive check box is selected for the coder, then the KIRK Wireless Server
600v3 is forced to use the coder.
11 Click OK.
12 Click Reset (under Administration menu) to save your configuration.