Filter
Top Products
Configuring KIRK Wireless Server 600v3 97
KIRK Wireless Server 600v3 Installation and Configuration Guide
7.6.1.6 Setting LDAP Replicator (Primary)
1 Under the Configuration menu, click LDAP, and then click Replicator.
Figure 50 Adm. Page: Configuration/LDAP/Replicator page
2 In the Server field, type the IP address of the LDAP server.
3 In the User field, type the user name.
4 In the Password field, type the password.
5 The Enable check box must be selected.
6 Click OK.
7 Click Reset (under Administration menu) to save your configuration.