Filter
Top Products
39
KIRK Wireless Server 600v3 Installation and Configuration Guide
Chapter 4 Installing the KIRK Wireless Server 600v3
This section provides a description of the KIRK Wireless Server 600v3 and describes how to
unpack and install it. The section also provides information about resetting the KIRK Wireless
Server 600v3 hardware using the Reset button on the KIRK Wireless Server 600v3 faceplate.
Before you install the equipment, ensure that a site planner defines the locations of the KIRK
Wireless Server.
This section contains the following information:
• “Unpacking” on page 39
• “Description of KIRK Wireless Server 600v3” on page 40
• “Installing the KIRK Wireless Server 600v3” on page 45
• “Recording the Installation Information” on page 46
4.1 Unpacking
4.1.1 Inspect for Damage
1 Inspect the shipping carton for evidence of physical damage or mishandling prior to opening.
2 Inspect all parts for damage.
3 Report any damage to the carrier immediately.
4 If it is necessary to make a damage claim for the carrier, do not move the shipping carton until
it has been examined by a representative of the carrier.
5 Dispose of empty cartons in accordance with local regulations.
4.1.2 Unpacking the Shipping Container
For indoor installations, the following items should be present in every box containing a KIRK
Wireless Server 600v3:
• KIRK Wireless Server 600v3
• Two mounting screws and anchors