Filter
Top Products
122 Configuring KIRK Wireless Server 600v3
14117800, Ed.2
7.6.4.7 Configuring DECT Radio (Secondary)
On the Radio page you define which radio ID the Master KIRK Wireless Server 600v3 and Sync
Master has to synchronize with.
1 Under the Configuration menu, click DECT, and then click Radio.
Figure 75 Adm. Page: Configuration/DECT/Radio page
2 In the Master field, type the IP address of the Master KIRK Wireless Server 600v3.
3 In the Radio-Id field, type the radio ID number of the KIRK Wireless Server 600v3. The radio
ID can be a number between 0 and 255. See your site planner.
Note: It is advisable to make the IP address numbering of a Secondary KIRK Wireless Server
600v3 identical with the radio ID number of the unit in question, eg.:
• IP address 192.168.1.3/Radio ID 3
• IP address 192.168.1.4/Radio ID 4
• IP address 192.168.1.5/Radio ID 5
4 In the Sync-Source field, type the radio ID of the KIRK Wireless Server 600v3, you want to
synchronize on. See your site planner.
5 In the Alt-Sync-Source field, type the radio ID of the KIRK Wireless Server 600v3, you want
to synchronize on. See your site planner.
6 Click OK.